Appendix G: Flange Adapter Versions; Dimensions; Threaded Connection, Ptfe Rod - Siemens Sitrans LR200 Instruction Manual

Appendix G: Flange Adapter Versions

Dimensions:

Threaded connection, PTFE Rod

WARNING: For pressure applications, it will be necessary to use PTFE tape
or other appropriate thread sealing compound, and to tighten the process
connection beyond hand-tight.
Notes:
• Process temperature and pressure capabilities are dependent upon information on the
process device tag. Reference drawing listed on the tag is available on the product page
of our website at: www.siemens.com/LR200, under More Info/Installation drawings/Level
Measurement/Installation Drawings/LR200.
• Additional information on process connections is available on the Installation Drawings
page under Process Connection Diagrams.
nameplate
locking ring
process
device tag
stainless steel
mounting thread
* 17 mm (0.67")
Page 150 SITRANS LR200 (HART) – INSTRUCTION MANUAL
PTFE rod
antenna
187 mm
7.4"
*
sensor
reference
point
412 mm (16.3")
7ML19985JP02