Setup
Note: For more detailed explanations of the parameters listed below see the pages
referenced.
Sensor
Navigate to Configure/Setup > Setup and click on Sensor for access to:
General [see
•
Units
•
Operating Mode
•
Material
•
Damping Filter
•
Antenna (read only)
Calibration [see
•
Low Calibration Point
•
High Calibration Point
•
Sensor Offset
Rate [see
•
Response Rate
•
Fill rate/minute
•
Empty rate/minute
Fail-safe [see
•
Material level
•
Timer
•
Level
Page 62
SITRANS LR200 (HART) – INSTRUCTION MANUAL
Sensor (2.2.)
on page 75]
Calibration (2.3.)
Rate (2.4.)
on page 77]
Fail-safe (2.5.)
on page 79]
on page 76]
7ML19985JP02