Table of Contents
Advertisement
Further details regarding the individual steps
Removing the top panels
Danger
Touching 'live' components can
result in the transfer of dangerous
body currents.
Never touch the terminals near
the connections (see page 59)
and in the control module below.
If the appliance is 'live', the con-
tact shield must be fitted as
cover for the electrical compo-
nents.
Danger
The absence of earthing on the
components can transfer danger-
ous body currents and may dam-
age the equipment, should an
electrical fault occur.
Always reinstate the earth con-
ductor connections when refitting
the panels.
Removing the transport brackets
Only required prior to commissioning in the delivered condition.
Commissioning, inspection, maintenance
!
Please note
Wait at least 30 min between the
installation and the commission-
ing of the appliance to prevent
equipment damage.
Work on the refrigeration cir-
cuit must only be carried out by a
qualified refrigeration engi-
neer.
For work in connection with the commis-
sioning, inspection and maintenance,
front panel, side panel and front top
panel (see page 57) must be removed.
Regarding commissioning this
appliance, see also the operating
instructions.
99
Hide quick links:
Advertisement
Table of Contents
