Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
For further information regarding the individual steps, see the page indicated
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
98
Commissioning steps
Inspection steps
Maintenance steps
1. Removing the top panels............................................... 99
2. Removing the transport brackets................................. 99
3. Maintaining service reports........................................... 100
4. Opening the heat pump.................................................. 101
5. Checking the refrigerant circuit for leaks..................... 102
6. Filling the primary circuit, venting it and checking its
pressure........................................................................... 102
7. Filling and venting the heating water side................... 103
8. Checking the diaphragm expansion vessel and the
heating circuit pressure................................................. 104
9. Checking the compressor casing temperature........... 104
10. Setting the control parameters...................................... 105
11. Commissioning assistant.............................................. 105
Page