Compressor Control Settings Compressor Enable - Viessmann Vitocal 300-G BW Installation And Service Instructions Manual

Compressor control settings
Compressor enable
Parameter
■ 5000
Access
■ "Device settings"
■ "Programming"
■ "Compressor"
■ y to"Enable"
Heat pump output
Parameter
■ 5030
Entry of the output for the energy state-
ment. If the current drawn and the heat-
ing energy transferred to the heating sys-
tem are to be determined in the statistic
area, then the heat pump output details
must be matched to the actual values.
Type
BW/BWC 106
BW/BWC 108
BW/BWC 110
BW/BWC 112
BW/BWC 114
BW/BWC 117
Access
■ "Device settings"
■ "Programming"
142
Output in kW
6
8
10
12
14
17
Standard setting
Setting range
Note
Pressing standard settings key
i to achieve a reset from the main
menu returns the output value into the
delivered condition (standard setting). A
different value than the actual heat pump
output in the standard condition results
to the display of incorrect values in the
energy statement.
■ "Compressor"
■ y to"Output"
■ l or m
Standard setting
Setting range
Yes
Yes/No
ª or
10 kW
1 to 255 kW