Further Details Regarding The Individual Steps; Opening The Heat Pump; Writing Reports - Viessmann KWT Vitocal 350-G Pro Series Installation And Service Instructions For Contractors

Commissioning, inspection, maintenance

Further details regarding the individual steps

Opening the heat pump

Danger
Contact with 'live' components
can lead to serious injury from
electric current.
Never touch the terminals of the
heat pump control unit and power
connections; see page 47.
Danger
The absence of component
earthing can result in serious
injury from electrical current and
in component damage in the
event of an electrical fault.
Remake all earth connections.
!
Please note
Wait at least 30 min between the
installation and commissioning of
the appliance to prevent equip-
ment damage.
Only qualified refrigeration
engineers should work on the
refrigerant circuit.

Writing reports

Enter readings taken during commis-
sioning (described in the following) into
the reports.
70
1. Open the top cover in accordance
with chapter "Siting the heat pump".
2. Close the heat pump after completing
all work.
See also the operating instruc-
tions on commissioning this
appliance.