Control Settings, Heating Circuits Standard Room Temperature - Viessmann Vitocal 300-G BW Installation And Service Instructions Manual

Control settings, heating circuits
Standard room temperature
Parameter
■ 2000 - HK A1
■ 3000 - HK M2
■ 4000 - HK M3
Reduced room temperature
Parameter
■ 2001 - HK A1
■ 3001 - HK M2
■ 4001 - HK M3
Heating circuit switching times
Parameter
■ 2002 - HK A1
■ 3002 - HK M2
■ 4002 - HK M3
Activating the remote control
Parameter
■ 2003 - HK A1
■ 3003 - HK M2
■ 4003 - HK M3
The Vitotrol 200 can be installed for
every heating circuit. It must be allocated
to the respective heating circuit.
160
Separate setting of switching times for all
heating circuits A1, M2 and M3.
Operating instructions
Separate setting of switching times for all
heating circuits A1, M2 and M3.
Operating instructions
Separate setting of switching times for all
heating circuits A1, M2 and M3.
Operating instructions
Note
Remote control units have no function
when the heat pump is in manual
mode " h " (see page 111).
Access
■ Device settings
■ Programming
■ Heating circ. 1
■ y until "Remote control" is high-
lighted