Swimming Pool - Viessmann Vitocal 300-G BW Installation And Service Instructions Manual

Temperature differential cooling
C Selected value "Temp. diff. cool-
ing"
D Adjusted outside temperature
E Cooling function ON
F Cooling function OFF
Access
■ "Device settings"
■ "Programming"

Swimming pool

Parameter
■ 7008
Specify whether a swimming pool is con-
nected and heated.
Note
Initially set parameter "External exten-
sion" (7010) to "Yes" (see page 135). If
that has not been done, then parameter
"Swimming pool" will not be displayed.
Cascade control (lead appliance)
Parameter
■ 700A
Access
■ "Device settings"
■ "Programming"
■ "System definition"
■ y to"Cascade control"
■ l or m
System definition control settings
(cont.)
■ "System definition"
■ y to "Temp. diff. cooling"
■ 5 or %
Standard setting
Setting range
Access
■ "Device settings"
■ "Programming"
■ "System definition"
■ y to"Swimming pool"
■ "YES" or "NO"
Standard setting
Setting range
Set whether the heat pump operates as
lead appliance in a cascade comprising
several heat pumps.
Standard setting
Setting range
Explanation:
0 No cascade
1 Cascade control via "External exten-
sion H1"
2 No function
4,0 K
1,0 to 20,0 K
No
Yes/No
0
0 to 2
133