When You Cannot Print Clearly - Ricoh SP C260SFNw User Manual

When You Cannot Print Clearly

Problem
The whole printout is blurred.
The toner is powdery and comes
away from the paper, or the printed
image has a matt appearance.
Toner smears appear on the print
side of the page.
• The paper being used may be damp. Use paper that has
been stored properly. See page 65 "Supported Paper".
• Select [Level 1: Weak], [Level 2: Medium] or [Level 3:
Strong] in [Anti-Humidity Level] under [System Settings].
Note that if you select [Level 2: Medium] or [Level 3:
Strong], the first print takes longer than subsequent prints.
• If you enable [Toner Saving] under [System Settings],
printing is generally less dense.
• If you select [On] for [Economy Color] in the [Print
Quality] tab (PCL printer driver or DDST printer driver) or
under [Printer Features] (PostScript 3 printer driver), print
will be at lower density. For details, see the printer driver
Help.
• The print cartridge is almost empty. If "Replacement
Required: Toner Cartridge (X)" ("X" indicates the toner
color) appears on the screen, replace the indicated print
cartridge.
• Condensation may have occurred. If rapid change in
temperature or humidity occurs, use this machine only
after it has acclimatized.
Check if the fusing unit levers are properly set. Pull up the
fusing unit levers.
• The paper setting may not be correct. For example,
although you are using thick paper, the setting for thick
paper may not be specified.
Check the printer driver's paper settings.
See the printer driver Help.
• Check that the paper is not curled or bent. Envelopes can
be curled easily. Flatten out the paper before loading it.
See page 50 "Loading Paper".
Printer Problems
Solution
375