Canceling A Transmission - Ricoh SP C260SFNw User Manual

6. Sending and Receiving a Fax
• When [Fax No. Confirmation] is set to [On], the machine prompts you to enter the fax number
twice only when you dial the destination manually. Destinations specified using the Speed Dial
function or [Redial] need not be confirmed. For details about [Fax No. Confirmation], see
page 186 "Preventing Transmission to the Wrong Destination".
• When in Memory Transmission mode, you can enable the [Auto Redial] setting under [Transmission
Setting] to set the machine to automatically redial the destination if the line is busy or an error
occurs during transmission. For [Auto Redial], see page 230 "Fax Features Settings".
• When in Memory Transmission mode, the machine's memory may become full while scanning the
originals. In this case, the screen prompts you to cancel the transmission or to send only the pages
that have been scanned successfully.
• You can scan 2-sided originals from the ADF in Memory Transmission mode. Specify how to scan
2-sided originals in the [Fax Original] setting under [Transmission Setting]. For [Fax Original], see
page 230 "Fax Features Settings".
• If paper is jammed in the ADF, the jammed page has not been scanned properly. When the
machine is in Immediate Transmission mode, resend the fax starting from the jammed page. When
in Memory Transmission mode, scan the entire originals again. For details about removing paper
jammed in the ADF, see page 353 "Removing Paper Jams".
• The machine can store up to 5 unsent fax jobs.

Canceling a Transmission

This section explains how to cancel a fax transmission.
Canceling a Transmission Before the Original Is Scanned
Use this procedure to cancel a transmission before pressing the [B&W Start] key.
1. Press the [Clear/Stop] key.
192
DUE308