Ricoh SP C260SFNw User Manual page 347

Message
Cannot Copy This Combined copying could not be
Setting performed because the tray
does not contain the valid size
Combine.: 2 page on
paper, which are A4, Letter, or
1 / 4 page on 1
Legal size.
Cannot copy. Combined copying could not be
performed because the originals
Set original to ADF.
were not placed in the ADF.
Check Paper Size The paper size set for the
document differs from the size of
the paper in the indicated tray.
Check Paper Type The paper type set for the
document differs from the type
of the paper in the indicated
tray.
Connection Failed The line could not be connected
correctly.
Cover open A cover is open.
Density Sensor The machine failed to adjust
Require Cleaning color registration.
Causes
• Set the machine to print copies using
• Specify the A4, Letter, or Legal size
• Use the ADF, even when copying a
• If you need to use the exposure glass,
Press [FormFeed] to begin printing, or
press [JobReset] to cancel the job.
Press [FormFeed] to begin printing, or
press [JobReset] to cancel the job.
• Confirm that the telephone line is
• Disconnect the telephone line from
Close the cover completely.
Clean the toner density sensor. See
page 330 "Cleaning the Toner Density
Sensor".
Error and Status Messages on the Screen
Solutions
the A4, Letter, or Legal size paper in
the [Select Paper] setting. See
page 223 "Copier Features Settings".
paper for the tray selected for printing
copies. See page 252 "Paper
Settings".
single sheet.
select [Off] or [Manual 2Sd Scan
Mode] in [Duplex/Combine] under
[Copier Features], and then try again.
See page 223 "Copier Features
Settings".
properly connected to the machine.
the machine, and connect a standard
telephone in its place. Confirm that
you can make calls using the
telephone. If you cannot make calls
this way, contact your telephone
company.
345