Specifying Scan Settings For Faxing - Ricoh SP C260SFNw User Manual

2. Press the [Home] key.
3. Press the [Fax] icon on the [Home] screen.
4. Pick up the handset of the external telephone.
5. Specify the destination using the external telephone.
6. When the other party answers, tell the receiver that you want to send them a fax
document (ask them to switch to facsimile mode).
7. If you hear a high pitched tone, press the [B&W Start] key.
8. If the original is placed on the exposure glass, press [TX], and then press the [B&W Start]
key.
9. Replace the handset.

Specifying Scan Settings for Faxing

Adjusting image density
This section describes how to adjust image density for the current job.
There are three image density levels. The darker the density level, the darker the printout.
DUE302
DUE315
Sending a Fax
199