Ricoh SP C260SFNw User Manual page 20

1. Guide to the Machine
No.
1 Input Tray for the ADF (Auto
document feeder)
2 Auto Document Feeder
(Exposure Glass Cover)
3 Exposure Glass
4 Extender for the ADF Tray
5 Standard Tray/Top Cover
6 Front Cover
7 Front Cover Open Lever
8 End Fence
9 Tray 1
10 Bypass Tray
11 Side Fence
12 Control Panel
13 USB Flash Disk Port
14 Output Tray for the ADF
15 ADF Cover
18
Name
Place stacks of originals here. They will feed in
automatically.
This tray can hold up to 35 sheets of plain paper for the
SP C260SFNw and up to 50 sheets of plain paper for
the SP C262SFNw.
The ADF is integrated with the exposure glass cover.
Open this cover to place originals on the exposure
glass.
Place originals here sheet by sheet.
Extend these when placing paper longer than A4 in the
input tray for ADF.
Printed paper is delivered to this tray. Up to 150 sheets
of plain paper can be stacked here.
Open this to replace the print cartridges.
Open this cover to replace the waste toner bottle or
remove jammed paper.
To open the front cover, pull this lever on the right side
of the machine.
Adjust this fence to the paper size.
This tray can hold up to 250 sheets of plain paper.
Load paper here sheet by sheet.
Adjust this fence to the paper size.
Contains a screen and keys for machine control.
Insert a USB flash disk for using the Scan to USB
function or connect a digital camera using a USB cable
for PictBridge printing.
Originals scanned with the ADF are delivered from
here.
Open this cover to remove originals jammed in the ADF.
Description