Loading Paper Into Bypass Tray - Ricoh SP C260SFNw User Manual

Loading Paper into Bypass Tray

• Before printing on paper other than envelopes, make sure to pull up the levers on the machine rear,
inside the rear cover. Leaving the levers lowered can cause print quality problems when printing on
paper other than envelopes.
• Do not load paper while the machine is printing.
• Load paper with the print side down and in the short-edge feed direction.
• Curled paper may jam. Straighten curled paper before loading.
• Duplex printing is not possible.
• Tray 1 and 2 are unavailable if paper is loaded in the bypass tray.
• You cannot load paper into the bypass tray while the machine is in Energy Saver mode.
1. Insert the top edge of the paper into the machine.
2. Adjust the paper guides to the paper size.
DUE224
DUE225
Loading Paper
55