Set Up The Lan Ipv6 Interface On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook

Security firewalls zywall/usg series

Hide thumbs Also See for ZyWALL 110:

Table of Contents

www.zyxel.com

Set Up the LAN IPv6 Interface on the ZyWALL/USG

In the ZyWALL/USG, go to CONFIGURATION > Network > Interface > Ethernet > lan1.

Select Enable Interface and Enable IPv6. Type 2002:7a64:dcee:1::111/128 in the

IPv6 Address/Prefix Length field for the LAN1's IP address.

Enable Router Advertisement. Then click Add in the Advertised Prefix Table to add

2002:7a64:dcee:1::/64. The LAN1 hosts will get the network prefix through the router

advertisement messages sent by the LAN1 IPv6 interface periodically. Click OK.

CONFIGURATION > Network > Interface > Ethernet > lan1 > General Settings

Show Quick Links

Table of Contents