How To Configure L2Tp Vpn With Android 5.0 Mobile Devices - ZyXEL Communications ZyWALL 110 Handbook

Security firewalls zywall/usg series

Hide thumbs Also See for ZyWALL 110:

Table of Contents

How to Configure L2TP VPN with Android 5.0 Mobile

This example shows how to use the VPN Setup Wizard to create a L2TP VPN

between a ZyWALL/USG and an Android 5.0 Mobile Device. The example instructs

how to configure the VPN tunnel between each site. When the VPN tunnel is

configured, each site can be accessed securely and allow traffic from L2TP

clients to go to the Internet.

Note: All network IP addresses and subnet masks are used as examples in this article.

Please replace them with your actual network IP addresses and subnet masks. This

example was tested using USG310 (Firmware Version: 4.25) and Android version (Firmware

Version: 5.0)

ZyWALL/USG L2TP VPN with Android Mobile Devices Example

www.zyxel.com

Show Quick Links

Table of Contents