www.zyxel.com
Set Up the Bandwidth Management for FTP on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > BWM > Configuration > Add Policy,
select Enable and type FTP Any-to-WAN as the policy's Description.
Leave the Incoming Interface to any and select the Outgoing Interface to be
wan1. Select Service Type to be the Service Object and select FTP from the list box.
Set the Guaranteed Bandwidth Inbound to 200 (kbps) and set Priority 5
(low-to-medium). Set the Maximum to 400 (kbps). Set the Guaranteed Bandwidth
Outbound to 200 (kbps) and set Priority 5. Set the Maximum to 400 (kbps).
In order to view the result later, set the Log setting to be log alert. Click OK to return
to the General screen.
607/749