www.zyxel.com
After creating the bridge interface, connect the server's network cable to
IntServer1 port and set the server's IP to be in the same subnet (172.124.163.158 in
this example).
Test the Result
Check the Interface Statistics, you can see br1 Status is up, Tx B/s displays the
transmission speed and Rx B/s displays the reception speed. IntServer1 and
PublicWAN are configured in the same vlan1 but using different IP address.
MONITOR > Interface Status > Interface Statistics
Server can access Internet successfully by using its IP address (172.124.163.158 in
this example) and Internet users can also reach this server by this public address as
well.
Windows 7 > cmd > ping 172.124.163.158
672/749