What Could Go Wrong - ZyXEL Communications ZyWALL 110 Handbook

What Could Go Wrong?

11
If you see below [info] or [error] log message, please check ZyWALL/USG Phase 1 Settings.
Both ZyWALL/USG at the HQ and Branch sites must use the same Pre-Shared Key, Encryption,
Authentication method, DH key group and ID Type to establish the IKE SA.
MONITOR > Log
12
If you see that Phase 1 IKE SA process done but still get below [info] log message, please
check ZyWALL/USG Phase 2 Settings. Both ZyWALL/USG at the HQ and Branch sites must use
www.zyxel.com
241/749