Set Up Ssl Inspection On The Zywall/Usg; Set Up The Security Policy On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook

www.zyxel.com

Set Up SSL Inspection on the ZyWALL/USG

In the ZyWALL/USG, go to CONFIGURATION > UTM Profile > SSL Inspection > Add
rule, configure a Name for you to identify the SSL Inspection profile.
Then, select the CA Certificate to be the certificate used in this profile. Select Block
to select Log type to be log alert. Leave other
Action for Connection with SSL v2 and
actions as default settings.
CONFIGURATION > UTM Profile > SSL Inspection > Add rule

Set Up the Security Policy on the ZyWALL/USG

In the ZyWALL/USG, go to CONFIGURATION > Security Policy > Policy Control,
configure a Name for you to identify the Security Policy profile. For From and To
policies, select the direction of travel of packets to which the policy applies. Select
the Schedule that defines when the policy applies (Youtube_Schedule in this
example).
Scroll down to UTM Profile, check Application Patrol and select a profile from the
list box (Youtube_profile in this example). Then, check SSL Inspection and select a
profile from the list box (Youtube in this example).
CONFIGURATION > Security Policy > Policy Control
509/749