Test The Ipsec Vpn Tunnel - ZyXEL Communications ZyWALL 110 Handbook

www.zyxel.com
CONFIGURATION > VPN > IPSec VPN > VPN Connection > Connect
10 Go to CONFIGURATION > Network > Interface > VTI. You will see that the status of
the VTI is up when the corresponding VPN tunnel is established.
CONFIGURATION > Network > Interface > VTI

Test the IPSec VPN Tunnel

1 To test whether or not a tunnel is working, ping from a PC in LAN1 of USG1 to a PC
in LAN1 of USG2 and vice versa.
PC of USG1 (192.168.1.34) > Window 7 > cmd > ping 192.168.11.33
PC of USG2 (192.168.11.33) > Window 7 > cmd > ping 192.168.1.34
407/749