How To Configure Site-To-Site Ipsec Vpn With A Sonicwall Router - ZyXEL Communications ZyWALL 110 Handbook

Security firewalls zywall/usg series

Hide thumbs Also See for ZyWALL 110:

Table of Contents

How to Configure Site-to-site IPSec VPN with a SonicWALL

This example shows how to use the VPN Setup Wizard to create a site-to-site VPN

between a ZYWALL/USG and a SonicWALL router. The example instructs how to

configure the VPN tunnel between each site. When the VPN tunnel is configured,

each site can be accessed securely.

ZyWALL/USG Site-to-site IPSec VPN with SonicWALL

Note: All network IP addresses and subnet masks are used as examples in this article.

Please replace them with your actual network IP addresses and subnet masks. This

example was tested using USG310 (Firmware Version: ZLD 4.25) and NSA240 (Firmware

Version: SonicOS Enhanced 5.8.0.1-31o)

www.zyxel.com

Show Quick Links

Table of Contents