Continue to Phase 2 Settings to select the Encapsulation, Encryption,
Authentication, and SA Life Time settings which MS Azure supports.
Set Local Policy to be the IP address range of the network connected to the
ZyWALL/USG and Remote Policy to be the IP address range of the network
connected to the MS Azure. Click OK.
Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN Settings (Phase 2
Setting)
Note: For more information about the IPsec Parameters supported in MS Azure, see the
Microsoft Azure Documentation
connections.
About VPN devices
www.zyxel.com
for Site-to-Site VPN Gateway
33/749