Plug The Usb Into The Device; Firmware Version - ZyXEL Communications ZyWALL 110 Handbook

diagnostic_info
firmware
packet_trace
Firmware Folder is Created Automatically

Plug the USB into the Device

Once the .bin file in the firmware folder is detected, the device will copy it to the RAM.
Plug the USB storage into the USB port
The following message shows on the console if the device fails to copy the .bin file.
Router> USB update-firmware failed: firmware copy fail
The Device Checks Running Partition for the Model ID and the

Firmware Version

www.zyxel.com
729/749