How To Configure L2Tp Vpn With Ios 8.4 Mobile Devices; Set Up The L2Tp Vpn Tunnel On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook

How to Configure L2TP VPN with iOS 8.4 Mobile Devices

This example shows how to use the VPN Setup Wizard to create a L2TP VPN
between a ZyWALL/USG and an iOS 8.4 Mobile Device. The example instructs how
to configure the VPN tunnel between each site. When the VPN tunnel is
configured, each site can be accessed securely and allow traffic from L2TP
clients to go to the Internet.
ZyWALL/USG L2TP VPN with iOS Mobile Devices Example
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using USG310 (Firmware Version: 4.25) and iOS (Firmware Version: 8.4).

Set Up the L2TP VPN Tunnel on the ZyWALL/USG

In the ZyWALL/USG, go to CONFIGURATION >Quick Setup > VPN Setup Wizard, use
the VPN Settings for L2TP VPN Settings wizard to create a L2TP VPN rule that can be
used with the remote iOS Mobile Devices. Click Next.
Quick Setup > VPN Setup Wizard > Welcome
www.zyxel.com
269/749