Test Your Internet Connection - ZyXEL Communications ZYWALL 5 Quick Start Manual

3.3 Test Your Internet Connection

Launch your web browser and navigate to www.zyxel.com. You don't need a dial-up program such as
Dial Up Networking. Refer to the User's Guide for more detailed information on the complete range
of ZyWALL features.
3.4 Using the Wizard to Configure a VPN Policy
Refer to your User's Guide for more background information about VPN.
1. When the ZyWALL is set to router mode, click VPN Wizard in the HOME screen to help you
edit a VPN rule that use a pre-shared key and configure IKE settings to establish a VPN tunnel.
2.
Fill in the fields and click Next to continue. Use this screen to configure the IP addresses of the
devices that can use the VPN tunnel. Local network refers to the devices behind the ZyWALL
and remote network refers to the devices behind the remote IPSec router.
ZyWALL 5 Internet Security Appliance
14
Enter the WAN IP address of your
ZyWALL. The ZyWALL uses its
current WAN IP address (static or
dynamic) in setting up the VPN
tunnel if you leave this field as
0.0.0.0.
Select IP Address and then enter an
IP address to identify the remote
IPSec router by its IP address.
Otherwise, select Domain Name and
enter the domain name.
If the remote secure gateway has a
dynamic WAN IP address and does
not use DDNS, enter 0.0.0.0 as the
secure gateway's address. In this
case only the remote secure gateway
can initiate SAs.