Rev. 7/9/2015
⇒
6.1
When installing this option in North America only:
Bind both cores with two bands [A], as shown below.
Note: The two bands are not included in options produced before March, 2015. To bind
the cores, use the bands (P/N: 11050047) registered as service parts or similar ones.
7.
Insert the Ethernet cable into the Ethernet port on this option.
8.
Insert the other end of the Ethernet cable to a PC for network setting.
9.
Plug the power cord into the wall socket and turn on the main power of the machine.
Do not unplug the USB cable while the machine is recognizing this option. It may
take between 30 seconds to 1 minute to finish recognizing it (the LEDs on the
Ethernet port of this option light up after recognizing this option; see below). If
unplugged, connect the cable again.
SM
USB Device Server Option Type M12
2-235
D197/D198/D199/D200/D201/D202