Ricoh D197 Service Manual page 229


Before fastening the screw, make sure that the finisher is correctly set in the rail of
the bottom plate.

When installing the punch unit in the finisher which is already installed, remove the
entrance guide plate [A] (

Note that this step is unnecessary when installing the finisher and punch unit at the
same time.
11. Attach the lower rear cover [A] and lower front cover [B] to the finisher (
12. Attach the left rear cover to the machine.
SM
×2).
2-159 D197/D198/D199/D200/D201/D202
Punch Unit PU3040
×2).