Ricoh D197 Service Manual page 348

Security Setting
7. Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 10.
If you select [Random Numbers], proceed to step 8.
8. Press [Change].
9. Enter the number of times that you want to overwrite using the number keys, and then
press [#].
10. Press [OK]. Auto Erase Memory is set.
11. Log out.
12. Check the display and make sure that the overwrite erase icon appears.
13. Check the overwrite erase icon.
The icon [1] is lit when there is temporary data to be overwritten, and blinks during
overwriting.
The icon [2] is lit when there is no temporary data to be overwritten.
Icon [1]
Icon [2]
D197/D198/D199/D200/D201/D202
This icon is lit when there is temporary data to be
overwritten, and blinks during overwriting.
This icon is lit when there is no temporary data to be
overwritten.
2-278 SM