Ricoh D197 Service Manual page 952

Shift Tray Lower Limit
Sensor 1
6-123-047
Gets information of specified sensor. Displays signal level of sensor as it is.
Shift Tray Lower Limit
Sensor 2
6-123-048
Gets information of specified sensor. Displays signal level of sensor as it is.
Shift Tray Lower Limit
Sensor 3
6-123-049
Gets information of specified sensor. Displays signal level of sensor as it is.
Shift Tray Lower Limit
Sensor 4
6-123-050
Gets information of specified sensor. Displays signal level of sensor as it is.
Shift Tray Lower Limit
Sensor 5
6-123-051
Gets information of specified sensor. Displays signal level of sensor as it is.
Punch Chad Full Sensor
6-123-052
Gets information of specified sensor. Displays signal level of sensor as it is.
Punch Set Detection
6-123-053
Gets connection status of punch unit.
Shift Jogger Set Detection
6-123-054
Gets connection status of setting jogger unit.
* Not Use: Currently, Booklet Finisher SR3170 (D688) / Finisher SR3160
(D689) do not have setting jogger in system configuration.
SM
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
ENG 0: connected
1: not connected
[0 or 1 / 0 / 1/step]
ENG 0: connected
1: not connected
5-377 D197/D198/D199/D200/D201/D202
Input Check Table