11. Attach the CIS cable [A] to the bracket (
12. Clamp the CIS cable [A] under the bracket and the upper side of the controller box [B].
13. Attach the CIS cable clamp [A] to the bracket in the controller box (
14. Attach the scanner cable [B] to CN590 on the IPU-sub board ( x1), CIS cable [C] to
CN592 on the IPU-sub board ( x1), and the SIO harness [D] to CN531 on the IPU board
( x1).
SM
x1).
2-71
D197/D198/D199/D200/D201/D202
SPDF DF3080
x1).