Ricoh D197 Service Manual page 147

11. Open the bridge unit right cover, and then attach the bridge unit to the machine (
knob screw [A]).
12. Close the bridge unit right cover.
13. Attach the upper left cover provided with the bridge unit.
14. Referring to the finisher's installation procedure, attach the L type connecting bracket
[A], but do not tighten the screws yet.
15. After the finisher is installed, turn the main power switch ON.
16. Check that the finisher can be selected at the operation panel.
SM 2-77 D197/D198/D199/D200/D201/D202
Bridge Unit BU3070
×2,