3.
For D688 only, install the hopper cover.
If optional punch unit PU3050 is to be installed, attach the hopper packed with the
punch unit. See the Installation Procedure for PU3050 (page 2-121).
4.
Remove the items in the package (fixing screws, etc.).
5.
Clean the right side of the upper cover with an alcohol cloth, and then attach the
cushion to the finisher.
Make sure that the cushion is aligned with the rear-lower edge [A] of the upper cover.
6.
Attach the shift tray [A] (
SM
Booklet Finisher SR3170 / Finisher SR3160
×1).
2-97
D197/D198/D199/D200/D201/D202