Ricoh D197 Service Manual page 288

Printer/Scanner Unit Type M12
4. Secure the HDD [B] (
5. Reattach the removed covers.
6. Plug the power cord and turn on the main power of the machine.
7. Do SP5-832-001 to format the hard disk.
8. Do SP5-853-001 to copy the preset stamp data from the firmware to the hard disk.
9. Do SP5-846-040 to copy the address book to the hard disk from the controller board.
10. Do SP5-846-041 to let the user get access to the address book.
11. Turn the main power off and on.
12. Enable the on-board NIC and USB in the SP mode.

SP5-985-001 (On-board NIC): 1 (Enabled)

SP5-985-002 (On-board USB): 1 (Enabled)
You must turn the machine off/on because the setting only takes effect after the machine is
restarted.
13. Turn off the main power after the power indicator turns off.
D197/D198/D199/D200/D201/D202
x3).
2-218 SM