Ricoh D197 Service Manual page 111


Stabilizers are attached to the LCIT when it is shipped. Do not remove any of them.
12. Turn the power switch ON.
13. Set the paper, and check that the paper size set in the paper feed tray is displayed on
the operation panel.
14. Adjust the registration for the paper feed unit.
SP1-001-0xx (Leading Edge Registration Tray 3)
-055 Tray3: Thin
-056 Tray3: Plain
-057 Tray3: Mid-thick
-058 Tray3: Thick 1
-059 Tray3: Thick 2
-060 Tray3: Thick 3
-061 Tray3: Thick 4
SP1-002-004 (Side-to-Side Registration Paper Tray 3)
SM
-062 Tray3: Thin:1200
-063 Tray3: Plain:1200
-064 Tray3: Mid-thick:1200
-065 Tray3: Thick 1:1200
-066 Tray3: Thick 2:1200
-067 Tray3: Thick 3:1200
-068 Tray3: Thick 4:1200
2-41
LCIT PB3170/ PB3230
D197/D198/D199/D200/D201/D202