16. Press [EXIT] to end the SP mode.
Note if the initial toner supply has not been performed
If you start printing without executing the initial toner supply at installation, the machine goes
to the toner end condition even if the machine has plenty of toner in the toner bottle. Do the
following procedure to perform the toner end recovery if the machine has entered the toner
end condition.
1. Open the front cover for five seconds or more.
2. Make sure that the toner bottle is set properly.
3. Close the front cover.
4. The toner end recovery automatically starts
SM
2-19
D197/D198/D199/D200/D201/D202
Main Machine Installation