Ricoh D197 Service Manual page 860

[S:FIN Jobs]
These SPs total finishing methods for scan jobs only. The finishing method is
8065
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
[L:FIN Jobs]
These SPs total finishing methods for jobs output from within the document
8066
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
[O:FIN Jobs]
These SPs total finishing methods for jobs executed by an external
8067
application, over the network. The finishing method is specified by the
application.
Sort
001
Number of jobs started in Sort mode.
Stack
002
Number of jobs started out of Sort mode.
Staple
003
Number of jobs started in Staple mode.
Booklet
004
Number of jobs started in Booklet mode. If the machine is in staple mode, the
Staple counter also increments.
Z-Fold
005
Number of jobs started In any mode other than the Booklet mode and set for
folding (Z-fold).
Punch
006
Number of jobs started in Punch mode. When Punch is set for a print job, the
P: counter increments. (See SP8-064-6.)
SM
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
5-285 D197/D198/D199/D200/D201/D202
SP Mode Tables - SP8000-1