Ospfv2 Neighbors - Siemens SCALANCE X-300 Configuration Manual

auth <RtrID> <AreaID>
<authtype> [password]
Delete <RtrID> <AreaID>
Example
The command
add 1.1.1.51 0.0.0.2
creates a virtual link to the router with ID "1.1.1.51" via the transit area "0.0.0.2". The
remaining parameters are set to the default values.
4.7.11

OSPFv2 Neighbors

Overview
In this dialog, you can monitor the OSPF neighbors. These include the dynamically detected
neighbors in the relevant networks and the configured virtual neighbors.
Figure 4-145 Current OSPFv2 Neighbors
Neighbor IP Address
IP address of the neighbor in this network.
Neighbor Router ID
Router ID of the neighbor. The two addresses can match.
Neighbor State
Status of the neighbor. The status can adopt the following values:
● down: The neighbor is not reachable
● attempt and init: Short-lived statuses during initialization
● two-way: Two-way receipt of Hello packets
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
Command
Changes the authentication of a virtual
link.
Possible types:
•
•
•
Deletes a virtual link.
4.7 The Router menu (SCALANCE X414-3E)
Description
None
Simple
MD5
Comment
-
-
309