Siemens SCALANCE X-300 Configuration Manual page 308

Configuration using Web Based Management and Command Line Interface
4.7 The Router menu (SCALANCE X414-3E)
Authentication Type
Select the authentication method of the virtual link here. You can choose between
● none: no authentication
● simple: authentication using a password
● MD5: authentication with keyed MD5 method
Key ID
Note
The "Key ID" text box is displayed only if the authentication method was set to MD5. Only
then is it possible to use several keys.
Enter the key ID here with which the password will be used as the key. Since the key ID is
transferred with the protocol, the same key must be stored under the same key ID on all
neighboring routers.
Password/Confirmation
If authentication uses a password, a key is required via MD5 that can be entered here.
Syntax of the Command Line Interface
Table 4- 98
info
add<RtrID> <AreaID> [<set-
ting=value>]
edit <RtrID> <AreaID> [<set-
ting=value>]
308
OSPFv2 Virtual Links - CLI\ROUTER\OSPF\AREAS\VLINKS>
Command
Displays the current virtual links.
Adds a new virtual link.
Possible settings:
•
•
•
•
Modifies a virtual link.
Possible settings:
•
•
•
•
Description
TD
Trans. Delay
RI
Retrans Interval
HI
Hello Interval
DI
Dead Interval
TD
Trans. Delay
RI
Retrans Interval
HI
Hello Interval
DI
Dead Interval
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
-
-
-
SCALANCE X-300 / X-400