Configuring with Web Based Management
5.3 The "Information" menu
● Interface Status
Shows the status of the WLAN interface:
– Down
– Loop back
– Waiting
– Point to Point
– Designated Router
– Backup D. Router
– Other D. Router
● OSPF Status
Shows the status of OSPF.
– Enabled: OSPF is enabled on the interface.
– Disabled: OSPF is disabled on the interface.
● Designated Router
Shows the IPv4 address of the designated router for this OSPF interface.
● Backup Designated Router
Shows the IPv4 address of the designated backup router for this OSPF interface.
● Events
Shows the number of status changes of OSPF.
5.3.13.3
OSPFv2 Neighbors
Overview
This page shows the dynamically detected neighbor routers in the relevant networks.
118
The interface is not available.
Loop back interface
Starting up and negotiating the interface.
Point-to-point link
The router is a designated router and generates network LSAs.
The router is the backup router for the designated router.
The Interface has started up. The router is neither a designated nor a designated backup
router.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12