Siemens SCALANCE X-300 Configuration Manual page 170

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
● –
Not a member of the multicast group, no multicast frames will be sent via this port.
● F
(Forbidden) Not a member of the multicast group. Moreover, this address must not be an
address learned dynamically with GMRP or IGMP.
Creating a new entry
Click on the "New Entry" button to add an entry to the address table. The Static Multicast
Configuration page opens in which you can make the necessary entries:
Figure 4-66
VLAN ID
Enter the ID of the VLAN to which the MAC address belongs. If nothing is set, the VLAN ID 1
is set as the basic setting.
MAC Address
Enter the MAC address you want to add to the address table.
Slot / Port
Here, select how a port should respond to multicast frames:
● M
Member, multicast frames are sent via this port.
● –
Not a member of the multicast group. No multicast frames are sent via this port.
● F
Forbidden, not a member of the multicast group. Moreover, this address may not be an
address learned dynamically with GMRP.
170
Static Multicast Configuration
Configuration Manual, 10/2014, C79000-G8976-C187-22
SCALANCE X-300 / X-400