Configuration using Web Based Management and Command Line Interface
4.2 The System menu
Download this file to all other IE switches you want to configure.
If individual settings are necessary for specific devices, these must be made online.
The stored configuration data is coded and, as a result, these files cannot be edited with a
text editor.
Syntax of the Command Line Interface
Table 4- 6
server [<ip>[:port]]
cfgname <string>
cfgsave
cfgload
logname <string>
logsave
fwname <string>
fwload
fwsave
keyload
certload
50
System Save & Load - CLI\SYSTEM\SAVELOAD>
Command
Specifies the IP address and, as an option,
the port of the TFTP server with which data
will be exchanged.
Specifies the name of a file (maximum 32
characters) from which the configuration
data will be loaded or in which the configura-
tion data will be saved.
Saves the configuration data in a file on the
TFTP server.
Loads the configuration data from a file on
the TFTP server.
Specifies the name of a file (maximum 32
characters) in which the log table is stored.
Saves the log table in a file on the TFTP
server.
Specifies the name of a file (maximum 32
characters) from which the firmware is load-
ed.
Loads the firmware from a file.
Saves the firmware in a file on the TFTP
server.
Loads the private SSL key from a file.
Loads an SSL certificate from a file.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
Administrator only.
Default value: 0.0.0.0
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Default value: Not defined.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
SCALANCE X-300 / X-400