The Switch Menu - Siemens SCALANCE X-300 Configuration Manual

Configuration using Web Based Management and Command Line Interface

4.5 The Switch menu

4.5 The Switch menu
Introduction
In this menu, you set the parameters for the switch functionality (assign it to layer 2) of the IE
switch. This includes the following functions:
● General switch settings such as mirroring, aging, and flow control.
● The filter table for unicast, multicast and broadcast frames.
● The management of multicast groups with IGMP/GMRP.
● The use of the spanning tree protocol.
● Configuration of VLANs and their dynamic configuration with GVRP frames.
● Specifying transfer priorities with CoS to Queue and DSCP to Queue Mapping.
● DCP port filter
● Topology diagnostics with LLDP
● IP address initialization with DHCP relay
● Loop detection
● 1:1 NAT
● Statistics counter for frames per port
132
Configuration Manual, 10/2014, C79000-G8976-C187-22
SCALANCE X-300 / X-400