Siemens SCALANCE X-300 Configuration Manual page 182

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
Syntax of the Command Line Interface
Table 4- 55
Command
info [ports]
inmode <mode> [ports]
ingress <rate> [ports]
egress <rate> [ports]
182
Load Limits Configuration - CLI\SWITCH\LIMITS>
Description
Shows the current settings for limiting pack-
ets. The settings are displayed according to
ports.
Specifies the ingress limiting mode for ports.
The <mode> parameter can have the follow-
ing values:
B
•
Broadcast
BM
•
Broadcast, Multicast
BMU
•
Broadcast, Multicast, Unicast (DLF)
ALL
•
All frames
Example:
inmode B 5.1
•
Sets the limiting mode for port 5.1 to
broadcast.
Specifies the ingress limiting rate for ports.
The <rate> parameter can have the following
values:
128k, 256k, 512k
•
1m, 2m, 4m, 8m, 16m, 32m, 64m, 128m,
•
256m
k stands for kilobits per second and
•
m for megabits per second.
Example:
ingress 256k 5.1, 6.2
•
Sets the ingress limiting rate for ports 5.1
and 6.2 to 256 kilobits per second.
Specifies the egress limiting rate for ports.
The abbreviations for the <rate> parameter
are the same as those of the ingress com-
mand.
Example:
egress 2m 5.2, 8.1-8.4
•
Sets the egress limiting rate for ports 5.2
and 8.1 to 8.4 to 2 megabits per second.
Comment
If a parameter (ports) is
specified, the CLI only
displays the selected
values.
If only the <mode> pa-
rameter is specified, the
settings are changed for
all ports.
If only the <rate> pa-
rameter is specified, the
settings are changed for
all ports.
If only the <rate> pa-
rameter is specified, the
settings are changed for
all ports.
Configuration Manual, 10/2014, C79000-G8976-C187-22
SCALANCE X-300 / X-400