Siemens SCALANCE X-300 Configuration Manual page 99

Configuration of the SNMPv3 groups
When you click on a group name, you open the page for configuring the group properties:
Figure 4-30
Group Name
The group name is displayed here. This text box is read-only, you can only assign the group
name when creating a group and you cannot modify it later.
Security Level
This text box displays the authentication and the encryption. You have the following three
options for the security levels:
Security level
no Auth / no Priv
Auth
Auth / Priv
Read and Write
Here, you enable or disable write access, read access and notification.
Current Entries
By clicking this button, you return to the list of SNMPv3 groups.
New Entry
After clicking this button, the page for creating a new group opens.
Delete
Click on this button to delete a group. If members are already entered in the group, you
cannot delete the group nor is it possible to change the security level for the group.
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
SNMPv3 Group Configuration
Special features
No authentication, no encryption.
Authentication with the MD5 or SHA algorithm, no encryption.
Authentication with the MD5 or SHA algorithm, encryption with
the DES3 algorithm.
4.4 The Agent menu
Comment
-
-
-
99