Siemens SCALANCE X-300 Configuration Manual page 45

Restore Factory Defaults and Restart
Click this button to restore the factory defaults for the configuration. The protected defaults
are also reset. An automatic restart is triggered.
Note
By resetting all the defaults, the IP address is also lost. An IE switch is then only accessible
using the Primary Setup Tool or the serial interface (IE Switch X-400 only).
Syntax of the Command Line Interface
Table 4- 4
restart
Table 4- 5
defaults
memreset
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
System Restart & Defaults - CLI>
Command
Restarts the IE switch
System Restart & Defaults - CLI\SYSTEM>
Command
Restores the factory defaults. The protect-
ed settings are also reset. The device is
restarted.
Restores the factory defaults. The protect-
ed settings are retained. The device is
automatically restarted.
Description
Description
4.2 The System menu
Comment
Administrator only.
T his command can be executed
from within all menus.
Comment
Administrator only.
This command has the same effect
as clicking the Restore Factory
Defaults and Restart
button in
WBM.
Administrator only.
This command has the same effect
Restore Memory
as clicking the
Defaults and Restart
button in
WBM.
45