TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
2
1
2
3
Workshop Manual Ed. 12-2011
GENERAL PROCEDURES
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
Voltage regulator removal (TE-TXC)
-
Remove the electronic control unit as described in the relevant paragraph.
-
Disconnect the connector (1).
1
H11107
3
-
Loosen the two retaining screws (2) and remove the regulator (3).
H11108
Voltage regulator removal (TC)
-
Remove the fuel tank as described in the relevant paragraph.
-
Disconnect the connector (1).
-
Loosen the two screws (2) and remove the voltage regulator (3).
H11109
H11110
E.20