Husqvarna TE 250-310 2012 I.E. Workshop Manual page 250

FRONT SUSPENSION
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
Fit collar bushing, O-ring, spring guide and nut onto piston rod.
Insert the rebound adjuster rod into the piston rod.
Make sure that at least an 18 mm (0.71 in.) portion of the rebound adjuster rod
protrudes from the piston rod.
H06886
Fill the damper unit with the specified quantity of oil (674 cm - 41,13 in ).
3 3
Slowly pump the piston rod up and down to help oil reach all points of the car-
tridge.
Note: if you haven't drained all oil from the damper unit on disassembly, follow
the procedure outlined below (Filling oil to specified level).
H06887
Workshop Manual Ed. 12-2011
I.26