Service Instructions For Ø48Usd Kayaba Fork; Front Suspension (Tc - Txc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
Workshop Manual Ed. 12-2011
FRONT SUSPENSION
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
Front suspension
Service instructions for Ø48USD Kayaba fork
GENERAL
The fork uses a multi-valve damping system with rebound and compression
adjustment and spring preload adjustment for static load.
Compression damping is controlled by a special valve located at the top of each
fork leg. Rebound damping is controlled by a sealed cartridge located inside
each inner tube.
Each fork leg has outer adjusters for compression and rebound damping.
Both fork legs have bleed valves to bleed air from the outer tube and drain
screws to drain cartridge oil.
INNER TUBES:
OUTER TUBES: CNC-machined aluminium alloy, anodised and polished in-
SLIDING BUSHES: Teflon
SEALS:
SPRINGS:
OIL:
SPRING TABLE
Fork static load is determined by the spring contained in each upper leg: suspen-
sion response may be changed by changing the spring or the tube spacer that
determines its preload, with no need to alter fork settings. "Spring+tube spacer"
kits available as spare parts are listed below.
MODEL
TXC-TC
TE
I.6
Special high-strength steel, chrome-plated and TIN-coated.
side.
-coated, stiction-free.
®
Computer-designed sealing rings ensure maximum sealing
on compression and minimal friction on rebound.
Steel springs, different spring rates (K) available. (See Table
for more detailed information).
Special KAYABA formulation prevents foaming and retains
same viscosity under any operating conditions; stiction-free.
SPRING RATE K (N/mm)
4.6
4.6