Husqvarna TE 250-310 2012 I.E. Workshop Manual page 90

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
8
Workshop Manual Ed. 12-2011
GENERAL PROCEDURES
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
- Place a vessel on the left-hand side of the cylinder, under the engine.
- Slacken the radiator cap (8).
- Slacken the clamp (11) and disconnect the hose (12) connecting the radiators
to the engine. Drain all fluid.
- Slacken the clamp (13) and disconnect the hose (14) connecting the radiator
to the water pump.
H10040
TE 310
- Due to the blow-by circuit structure, engine oil must be drained in the TE
310 version.
For the oil draining operation, follow the instructions outlined in the respec-
tive section.
E.26